Accurately obtaining building damage situation in disaster areas provides decision-making support for disaster relief and post-disaster reconstruction. The existing evaluation methods using polarization featuresare greatly influenced by the orientation angle of buildings

and the intact buildings with large orientation anglesare easily misclassified for the collapsed buildings. The combination of multiple features is an effective way to improve the accuracy of building damage assessment

in which the texture features play an important role. This paper proposed a new building damage assessment method which applies the texture features of polarization decomposition components. There are three key procedures in this method. Firstly

the non-building areasare removed by thefiltered π/4 double-bounce scattering component of Pauli decomposition. Secondly

thestrategy of extracting collapsed buildings is built.For building areas

the Variance and Contrast features of Gray-Level Co-occurrence Matrix (GLCM) are calculated on the Pauli decomposition parameters. Specifically

the Variance and Contrast textures are obtained by the π/4 double-bounce scattering component of Pauli decomposition; the Variance texture is given by the odd scattering component of Pauli decomposition. Then

the appropriatethresholds for distinguishing collapsed buildings from intact buildings are determined by these texture features.When the texture feature value of the pixel is smaller than the threshold

then the pixel is classified as collapsed building

otherwise

the pixel is identified as intact building. At last

building damage assessment is implemented. The building damage indexes computed by the three texture features are averaged to get the final building damage index

and then the result of building damage assessment is obtained. This method was validated on RADARSAT-2 fine-mode polarimetric SAR imagery from the Yushu earthquakeacquired on April 21

2010. The ground-truth map of the buildings in Yushu city

interpreted on high-resolution optical data

was used as a reference for comparison. Compared with the

H-α-ρ

method

the method with homogeneous texture of span image and the method with integrated Normalized Circular-pol Correlation Coefficient (NCCC) and homogeneous texture feature

the building damage assessment accuracy of the proposed method was the highest

and its overall accuracy was improved to 74.39%.Particularly

the detection rate for serious damage buildings is 100%

and the false alarm rate is 15.62%. In addition

the intact buildings with large orientation angles in northeastern corner of the city were also extracted correctly. Based on the experimental analysis

the main factor of affecting the accuracy is the similarity of Pauli polarization features

the Variance and Contrast texture features betweenthe flat and dense intact building areas and serious damaged building areas. In addition

the effectiveness of the proposed method was verified by the ALOS-1 data after the 2011east Japan earthquake and tsunami

and its overall accuracy was improved to 80.26%. A damage assessment method based on texture features from GLCM of Pauli decomposition components is proposed in this paper. In this method

Pauli decomposition parameter was utilized to remove non-building areas

which was capable of removing the non-building areaseffectively

such as rivers

roads

bare ground and so on. By the comprehensiveutilization of the GLCM texture features of three Pauli decomposition components

the collapsed buildings can be extracted more accurately. By comparison with other methods

the results confirm the validity of the proposed method.