The ocean covers more than 71% of the Earth. Studies on vast oceans are of great significance for resource utilization and climate change. Several methods have been employed to detect the interior of the ocean. In-situ methods can accurately obtain marine information but their efficiency is limited. Ocean color remote sensing can collect global data. However

the limited information about the depth and dependence on natural light restrict its applications. Acoustics are widely used for seawater profiling

but they can only work under water due to the high loss in air–water interface. LiDAR is an effective method used to deal with seawater profiling with few limitations of platforms and natural light

in which its applicable coverage is from the water surface to the depth with several tens of meters. A polarized lidar with high vertical resolution (approximately 0.225 m in the water and 0.3 m in the atmosphere) and real-time detecting capability was developed to detect the profile information of atmospheric-water particulates. The laser was linearly-polarized to obtain the polarized information about the water column. Two refractive telescopes were used to collect the backscattering light from the water. Two polarizers were set in front of the telescopes

which only transmitted return signals that were co-polarized or cross-polarized with the laser. A retrieval algorithm based on polarized lidar returns was proposed to obtain atmospheric-water attenuation and depolarized optical products

such as

extinction coefficient (atmosphere)

diffuse attenuation coefficient (water)

depolarized ratio (atmosphere and water)

forward depolarized coefficient (water)

and backward depolarized ratio (water). An experimental sample from the inland water in Xiakou Reservoir

China during the night between April 6 and 7

2017 was presented to discuss the physical meanings and scientific values of the optical products. The retrieved optical products presented the variation of atmospheric aerosols and water turbidity during the night. For the clear atmosphere

the depolarized ratio was approximately 0.01 and the extinction coefficient was approximately 0.08 m

–1

. However

they became 0.06 and 0.02 m

–1

respectively

when the atmosphere was interrupted by several aerosols. For the water column

the diffuse attenuation coefficient varied from 0.6 m

–1

to 0.4 m

–1

depolarized ratio was from 0.6 to 0.4

and forward depolarized coefficient was from 0.06 m

–1

to 0.02 m

–1

when water turbidity became constantly clear after the rainfall. The analysis showed that depolarized ratio can be divided into depolarizations caused by forward multiple scattering and backward single scattering. Diffuse attenuation coefficient can be employed to describe the intensity of multiple scattering and is related to the depolarization caused by forward multiple scattering. Furthermore

depolarized ratio depends on the depolarization caused by forward multiple scattering when multiple scattering is strong. Otherwise

depolarized ratio depends on the depolarization caused by backscattering. A polarized lidar was developed to detect atmospheric-water particulate profile information. A retrieval algorithm based on polarized lidar returns was proposed to obtain atmospheric-water attenuation and depolarized optical products. An experimental sample from the inland water in Xiakou Reservoir

China was presented. High-range-resolution optical products were obtained

and the variations of aerosols and water were observed. The analysis presented that depolarized ratio can be divided into depolarizations caused by forward multiple scattering and backward single scattering. Furthermore

depolarized ratio depends on the depolarization caused by forward multiple scattering when multiple scattering is strong. Otherwise

depolarized ratio depends on the depolarization caused by backscattering.