Précédent|Prochain

Fine classification of near-ground point cloud based on terrestrial laser scanning and detection of forest fallen wood

  • role： First author第一作者
  • Affiliation：

    Research Institute of Forest Resource Information Techniques, Chinese Academic of Foresty, Beijing 100091, China

  • Email：mazhenyu22@163.com
  • Introduction：马振宇，1993年生，男，研究方向为激光雷达林业应用。E-mail：mazhenyu22@163.com
MA Zhenyu,  
  • Affiliation：

    Research Institute of Forest Resource Information Techniques, Chinese Academic of Foresty, Beijing 100091, China

PANG Yong,  
  • Affiliation：

    Research Institute of Forest Resource Information Techniques, Chinese Academic of Foresty, Beijing 100091, China

LI Zengyuan,  
  • Affiliation：

    Research Institute of Forest Resource Information Techniques, Chinese Academic of Foresty, Beijing 100091, China

LU Hao,  
  • Affiliation：

    Research Institute of Forest Resource Information Techniques, Chinese Academic of Foresty, Beijing 100091, China

LIU Luxia,  
  • Affiliation：

    Research Institute of Forest Resource Information Techniques, Chinese Academic of Foresty, Beijing 100091, China

CHEN Bowei

résumé

Terrestrial Laser Scanning (TLS) can effectively describe complex forest scenes. This study aimed to classify ground point cloud within the height of 1.3 m into ground, vegetation, fallen wood, and standing trunk based on the TLS obtained from fallen wood plots in Daxing’anling. Fallen wood cloud point was segmented and merged. The optimal 3D neighborhood of each individual point was calculated through the Shannon entropy constructed by linearity, planarity, and scattering to avoid the difference in cloud density and the morphological characteristics introduced by occlusion. Shannon entropy could be maximized across the increasing kNN with an interval of 5 points. The optimal neighborhood size was used to compute the covariance eigenvalues for constructing 3D and 2D features. Key features were selected following the recursive feature elimination criteria, and a random forest classification algorithm was used to classify the points. Noise removal approach was applied to the fallen wood points classified by self-adjusting kNN features, and random sample consensus (RANSAC) segmentation was implemented to segment cylinders. Fallen wood cylinders were selected and merged depending on the axis direction less than 12° and the distance less than 0.1 m between each other. The overall classification accuracies of self-adjusting kNN method in plots A, B, and C were 93.17%, 94.52%, and 95.16%, respectively, and corresponding Kappa coefficients were 0.8771, 0.9145, and 0.9242, respectively. The overall accuracies of non-self-adjusting kNN were 92.65%, 89.09%, and 92.99%, and the Kappa coefficients were 0.8684, 0.8909, and 0.9299. Point cloud of plots B and C was classified using the model we trained using plot A. The classification accuracies of plots B and C were 62.38% and 59.80%, and the user precisions of fallen wood point cloud were 79.31% and 48.06%. All fallen woods had the same number as the ground measurement, and the parameters of fallen wood could be estimated roughly. Compared with the non-self-adjusting kNN method, the near-ground point cloud classification accuracy was improved by the self-adjusting kNN point cloud feature. Classification of plots B and C using the training result of plot A suggested that the selected key features in the complex forest could explain the dependent variable well. RANSAC could effectively segment the cylinder and estimate the parameters of the fallen wood. This research is significant for extracting parameters of the existing work. Further ecological research will be considered accordingly.

mots-clés

Terrestrial Laser Scanning (TLS);point cloud;fallen wood;random forest classification;Random Sample Consensus (RANSAC)

References

  1. 1.
    Breiman L. 2001. Random forests. Machine Learning, 45(1): 5–32
  2. 2.
    Carmona M R, Armesto J J, Aravena J C and Pérez C A. 2002. Coarse woody debris biomass in successional and primary temperate forests in Chiloé Island, Chile. Forest Ecology and Management, 164(1/3): 265–275
  3. 3.
    Cornaby B W and Waide J B. 1973. Nitrogen fixation in decaying chestnut logs. Plant and Soil, 39(2): 445–448
  4. 4.
    Fischler M A and Bolles R C. 1981. Random sample consensus: a paradigm for model fitting with applications to image analysis and automated cartography. Communications of the ACM, 24(6): 381–395
  5. 5.
    Granitto P M, Furlanello C, Biasioli F and Gasperi F. 2006. Recursive feature elimination with random forest for PTR-MS analysis of agroindustrial products. Chemometrics and Intelligent Laboratory Systems, 83(2): 83–90
  6. 6.
    Kankare V, Holopainen M, Vastaranta M, Puttonen E, Yu X W, Hyyppä J, Vaaja M, Hyyppä H and Alho P. 2013. Individual tree biomass estimation using terrestrial laser scanning. ISPRS Journal of Photogrammetry and Remote Sensing, 75: 64–75
  7. 7.
    Király G and Brolly G. 2007. Tree height estimation methods for terrestrial laser scanning in a forest reserve//International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences. Finland: ISPRS: 211-215
  8. 8.
    Lalonde J F, Vandapel N, Huber D F and Hebert M. 2006. Natural terrain classification using three‐dimensional ladar data for ground robot mobility. Journal of Field Robotics, 23(10): 839–861
  9. 9.
    Liang X L, Litkey P, Hyyppä J, Kaartinen H, Vastaranta M and Holopainen M. 2012. Automatic stem mapping using single-scan terrestrial laser scanning. IEEE Transactions on Geoscience and Remote Sensing, 50(2): 661–670
  10. 10.
    Lindberg E, Hollaus M, Mücke W, Fransson J E S and Pfeifer N. 2013. Detection of lying tree stems from airborne laser scanning data using a line template matching algorithm. ISPRS Annals of Photogrammetry, Remote Sensing and Spatial Information Sciences, II-5/W2: 169–174
  11. 11.
    Liu L X. 2014. Retrieving Vertical Structural Parameters of Forest Using Terrestrial and Airborne Laser Scanning Data. Beijing: Chinese Academy of Forestry
  12. 12.
    Liu L X, Pang Y, Li Z Y, Si L and Liao S X. 2017. Combining airborne and terrestrial laser scanning technologies to measure forest Understorey volume. Forests, 8(4): 111
  13. 13.
    Ma L X, Zheng G, Eitel J U H, Moskal L M, He W and Huang H B. 2016. Improved Salient feature-based approach for automatically separating photosynthetic and nonphotosynthetic components within terrestrial Lidar point cloud data of forest canopies. IEEE Transactions on Geoscience and Remote Sensing, 54(2): 679–696
  14. 14.
    Mallet C, Bretar F, Roux M, Soergel U and Heipke C. 2011. Relevance assessment of full-waveform Lidar data for urban area classification. ISPRS Journal of Photogrammetry and Remote Sensing, 66(S6): S71–S84
  15. 15.
    Moskal L M and Zheng G. 2011. Retrieving forest inventory variables with terrestrial laser scanning (TLS) in urban heterogeneous forest. Remote Sensing, 4(1): 1–20
  16. 16.
    Na L. 2015. Typical forest community structure and fallen log characteristics in Inner Mongolia greater Khingan mountains. Hohhot: Inner Mongolia Agricultural University
  17. 17.
    Nyström M, Holmgren J, Fransson J E S and Olsson H. 2014. Detection of windthrown trees using airborne laser scanning. International Journal of Applied Earth Observation and Geoinformation, 30: 21–29
  18. 18.
    Olofsson K, Holmgren J and Olsson H. 2014. Tree stem and height measurements using terrestrial laser scanning and the RANSAC algorithm. Remote Sensing, 6(5): 4323–4344
  19. 19.
    Polewski P, Yao W, Heurich M, Krzystek P and Stilla U. 2015. Detection of fallen trees in ALS point clouds using a Normalized Cut approach trained by simulation. ISPRS Journal of Photogrammetry and Remote Sensing, 105: 252–271
  20. 20.
    Pyle C and Brown M M. 1999. Heterogeneity of wood decay classes within hardwood logs. Forest Ecology and Management, 114(2/3): 253–259
  21. 21.
    Rowell E M, Seielstad C A and Ottmar R D. 2016. Development and validation of fuel height models for terrestrial Lidar – RxCADRE 2012. The International Journal of Wildland Fire, 25(1): 38–47
  22. 22.
    Rubino D L and McCarthy B C. 2003. Evaluation of coarse woody debris and forest vegetation across topographic gradients in a southern Ohio forest. Forest Ecology and Management, 183(1/3): 221–238
  23. 23.
    Sandberg D V, Riccardi C L and Schaaf M D. 2006. Fire potential rating for wildland Fuelbeds using the fuel characteristic classification system. Canadian Journal of Forest Research, 37(12): 2456–2463
  24. 24.
    Wang D, Hollaus M, Puttonen E and Pfeifer N. 2016. Automatic and self-adaptive stem reconstruction in landslide-affected forests. Remote Sensing, 8(12): 974
  25. 25.
    Weinmann M, Jutzi B and Mallet C. 2014. Semantic 3D scene interpretation: a framework combining optimal neighborhood size selection with relevant features. ISPRS Annals of Photogrammetry, Remote Sensing and Spatial Information Sciences, II-3: 181–188
  26. 26.
    Weinmann M, Urban S, Hinz S, Jutzi B and Mallet C. 2015. Distinctive 2D and 3D features for automated large-scale scene analysis in urban areas. Computers and Graphics, 49: 47–57
  27. 27.
    Xin W W. 2012. Research on Daxing’anling Larix Regeneration of Fallen Tree Characteristics and Update Mechanism. Hohhot: Inner Mongolia Agricultural University.
  28. 28.
    Yang L Y, Dai L M and Zhang Y J. 2002. Storage and decomposition of fallen wood in dark coniferous forest on the north slope of Changbai Mountain. Chinese Journal of Applied Ecology, 13(9): 1069–1071
  29. 29.
    Yong K. 2008. Research on Feature Selection and Model Optinization of Random Forest. Harbin: Harbin Institute of Technology
  30. 30.
    Zhao Y S. 2013. Remote Sensing Application Analysis Principles and Methods. Beijing: Science Press
  31. 31.
    Zheng G, Moskal L M and Kim S H. 2013. Retrieval of effective leaf area index in heterogeneous forests with terrestrial laser scanning. IEEE Transactions on Geoscience and Remote Sensing, 51(2): 777–786

Lire l'article complet

The above content is generated by Large Model Translation. The translated content is for reference only. We do not assume any commercial or legal responsibilty for any consequences arising from the use of our website