浏览全部资源
扫码关注微信
网络出版日期： 2024-01-16 ，
扫 描 看 全 文
金雁敏，李益峰，宋正翔，王超，刘世杰，柳思聪，童小华.XXXX.顾及左右摆扫不同影响的航空大视场高分红外扫描仪几何外检校方法.遥感学报，XX（XX）： 1-12
JIN Yanmin，LI Yifeng，SONG Zhengxiang，WANG Chao，LIU Shijie，LIU Sicong，TONG Xiaohua. XXXX. Geometric external calibration method for the airborne large-view-field infrared scanner considering different effects of left and right pendulum directions. National Remote Sensing Bulletin， XX（XX）：1-12
摆扫航空大视场红外扫描仪具有视场角大、分辨率高等优点，但因在传感器安装、运输、飞行时会受到抖动的影响，常导致传感器的中心、安置角度发生偏移。因此有必要对CCD影像进行几何外检校，以提高传感器影像的几何质量。特别是此类扫描仪不同摆扫方向会对成像质量造成不同影响，因此本文针对航空大视场红外扫描仪成像特点，构建了考虑左、右摆扫不同影响的几何外检校模型。该检校模型具有如下特点：（1）左、右摆影像同时检校，并分别设置不同的安置参数矩阵。扫描仪的左、右摆扫会造成成像积分方向的不同，进而导致左、右摆影像定位精度的不一致，因此利用不同的左、右摆参数矩阵，消除摆扫角误差对成像几何精度造成的影响。（2）增加检校参数伪观测方程。由于该航空大视场红外扫描仪存在大摆扫角，随着摆扫角的变化，相机与定位定姿系统安置误差检校参数间可能存在较强相关性，因此引入检校参数伪观测方程。实验结果表明该检校模型能有效提升影像的几何定位精度，检校后左右摆影像反投影偏差降低到亚像素水平。
Objective The airborne pendulum large-view-field infrared scanner has the advantages of large view field and high-resolution images. However
it may be affected by a variety of factors in the sensor installation
transportation and flight processes
which may cause the position centers and angles of the sensor and the POS system to be changed. Therefore
it is necessary to carry out geometric calibration to improve the geometric quality of the images acquired by the sensor. Furthermore
this scanner produces left-pendulum and right-pendulum images respectively during the flight. And the left-pendulum and right-pendulum images have different imaging integration direction
which may cause different influence on imaging quality. Therefore
the purpose of this paper is to present an external geometric calibration method considering different influences of the different pendulum directions.Method By considering different influences of the different pendulum directions of this airborne pendulum large-view-field infrared scanner
a geometric external calibration model is introduced
and it is characterized by: (1) The installation errors of the sensor and POS are considered. And both of the left- and right- pendulum images are used to calculate the installation parameters. Especially
different calibration parameters are used for the right- and left- pendulum images. The aim is to compensate the different influences caused by different imaging integration directions. (2) Furthermore
calibration parameters for the installation errors of the sensor and POS are regarded as pseudo-observations. Because the installation errors of the sensor and POS are generally small. By regarding the calibration parameters as the pseudo-observations
the calibration model can avoid very large unreasonable estimated parameters.Results and conclusions The proposed method is applied in the calibration of the images collected by this airborne pendulum large-view-field infrared scanner. Experimental results show that the calibration model can effectively improve the geometric positioning accuracy of the images. The absolute average back-projection residuals of the control points in the left- and right- pendulum images are improved to be sub-pixel level.
航空大视场高分红外扫描仪左右摆扫几何外检校检校参数
airborne pendulum large-view-field infrared scannerleft- and right- pendulum imagesgeometric external calibrationcalibration parameters
Cramer M. 2006. The ADS40 Vaihingen/Enz geometric performance test. ISPRS Journal of Photogrammetry and Remote Sensing, 60(6): 363-374. [DOI 10.1016/j.isprsjprs.2006.05.004http://dx.doi.org/10.1016/j.isprsjprs.2006.05.004]
Dong H, Liu H T. 2015. Simulation analysis of large FOV infrared scanning imaging quality on aircraft yawing rotation. Infrared and Laser Engineering, 44(03): 810-815
董浩, 刘会通. 2015. 载机偏航运动对大视场红外扫描装置成像质量影响的仿真分析. 红外与激光工程, 44(03): 810-815
Fraser C S. 1997. Digital camera self-calibration. ISPRS Journal of Photogrammetry and Remote sensing, 52(4): 149-159. [DOI 10.1016/S0924-2716(97)00005-1http://dx.doi.org/10.1016/S0924-2716(97)00005-1]
Jiang Y H, Zhang G, Tang X M, Chu X Y, Qin J Q, Li D R and Fu X K. 2013. High Accuracy Geometric Calibration of ZY-3 Three-line Image. Acta Geodaetica et Cartographica Sinica, 42(04): 523-529+553
蒋永华, 张过, 唐新明, 祝小勇, 秦前清, 李德仁, 付兴科. 2013. 资源三号测绘卫星三线阵影像高精度几何检校. 测绘学报, 42(04): 523-529+553
Leng B, Wang F, You H J and Hu Y X. 2019. Research on improvement method of positioning accuracy of area array image. GNSS World of Chine, 44(04): 8-15
冷波, 王峰, 尤红建, 胡玉新. 2019. 面阵图像定位精度提升方法研究. 全球定位系统, 44(04): 8-
15[DOI 10.13203/j.whugis20170075http://dx.doi.org/10.13203/j.whugis20170075]
Li D R, Zhao S M, Lu Y H and Hu W Y. 2007. Combined Block Adjustment for Airborne Three-line CCDScanner Images. Acta Geodaetica et Cartographica Sinica, (03): 245-250
李德仁, 赵双明, 陆宇红, 胡文元. 2007. 机载三线阵传感器影像区域网联合平差. 测绘学报, (03): 245-250
Li X Y, Hu Z Y, Jiang L Y and Chen F S. 2022. In-orbit geometric imaging simulation based on ray-tracing for long-linear-array and whisk-broom thermal infrared imager. Journal of Infrared Millimeter Waves, 41(01): 199-209
李潇雁, 胡琸悦, 江林逸, 陈凡胜. 2022. 基于光线追迹的长线列摆扫式热像仪在轨几何成像仿真方法. 红外与毫米波学报, 41(01): 199-209
Liu J, Wang D H, Liu J X and Zhang L. 2009. IMU/DGPS Supported Block Adjustment of ADS40 Three Line Imagery Data. Acta Geodaetica et Cartographica Sinica, 38(01): 55-60
刘军, 王冬红, 刘敬贤, 张莉. 2009. IMU/DGPS系统辅助ADS40三线阵影像的区域网平差. 测绘学报, 38(01): 55-60
Mikhail E. 1976. Observations and least squares. New York : IEP-A Dun-Donnelley Publisher.
Mo D L. 2018. Research on Imaging Model and Geometric Calibration Method for Airborne Long Focal Wiskbroom Camera. Thesis. Information Engineering University, Zhenzhou, China.
莫德林. 2018. 航空长焦斜视相机成像模型与几何检校方法研究. 战略支援部队信息工程大学, 郑州
Wang F, Yao X H, You H J and Li F F. 2017. Geometric Positioning Accuracy Improvement Method Based on Multi-observation of GF-2 Satellite. The 4th of China High Resolution Earth Observation Conference, 1579-1588
王峰, 姚星辉, 尤红建, 李芳芳. 2017. 基于高分二号卫星多重观测的几何定位精度提升方法. 第四届高分辨率对地观测学术年会论文集, 1579-1588
Wang T, Zhang Y S, Zhang Y and Fang D Z. 2012. Airborne Linear CCD Sensor Geometric Calibration Based on Self-calibration. Acta Geodaetica et Cartographica Sinica, 41(03): 393-400
王涛, 张永生, 张艳, 范大昭. 2012. 基于自检校的机载线阵CCD传感器几何标定. 测绘学报, 41(03): 393-400
Wang T, Zhang Y, Zhang Y S and Mo D L. 2020. Geometric calibration of domestic airborne wide-field three-linear CCD camera. Journal of Remote Sensing, 24(06): 739-751
王涛, 张艳, 张永生, 莫德林, 于英. 2020. 国产机载大视场三线阵CCD相机几何标定. 遥感学报, 24(06): 739-751
Wang T, Zhang Y, Zhang Y S, Jiang G, Zhang Z, Yu Y and Dou L. 2019. Geometric Calibration for the Aerial Line Scanning Camera GFXJ. Photogrammetric Engineering & Remote Sensing, 85(9): 643-658
Wang Q. 2017. Research on Geometric Calibration of Linear Array Whisking Broom Thermal Infrared Camera. Thesis, Nanjing University of Aeronautics and Astronautics, Nanjing, China(王青. 2017. 线阵摆扫式热红外相机几何定标研究. 南京航空航天大学, 南京)
Ye S R. 2017. Study on Geometric Exterior Calibration Method for Infrared Scanner with Large Field of View. Thesis, Wuhan University, Wuhan, China
叶思熔. 2017. 大视场机载摆扫红外扫描仪几何外检校方法研究. 武汉大学, 武汉
Ye S R, Jiang W S, Li J L, Liu X B. 2017. Imaging simulation and error analysis of large field of view airborne infrared scanner. Infrared and Laser Engineering, 46(04): 134-139
叶思熔, 江万寿, 李金龙, 刘晓波. 2017. 某大视场机载摆扫红外扫描仪几何成像仿真与误差分析. 红外与激光工程, 46(04): 134-
139[DOI 10.3788/IRLA201746.0420005http://dx.doi.org/10.3788/IRLA201746.0420005]
Zhao S M, Li D R. 2006. Experimentation of Adjustment Math Model for ADS40 Sensor. Acta Geodaetica et Cartographica Sinica, 35(4): 48-52
赵双明, 李德仁. 2006. ADS40机载数字传感器平差数学模型及其试验.测绘学报, 35(4): 48-52
Zhang Y, Wang T, Feng W F, Yuan C P and Wang S X. 2015. Self-calibration block adjustment for Mapping Satellite-1 three linear CCD image. Journal of Remote Sensing, 19(02): 219-227
张艳, 王涛, 冯伍法, 元朝鹏, 王淑香. 2015. “天绘一号”卫星三线阵CCD影像自检校区域网平差. 遥感学报, 19(02): 219-227
相关文章
相关作者
相关机构
京公网安备11010802024621